VanCurve 818 x 315 - Window for campervans - With blind and mosquito net
- Double acrylic glazing 43R
- Aluminium frame
- Installation guide supplied
Curved double acrylic glazing that follows the side panel, in an aluminium frame. Supplied complete with blackout blind, mosquito net and fitting tutorial. The size shown is the cut-out. See all sizes See more
or 3 × £96.00 interest-free with Klarna
Pay in 3 interest-free instalments: the first when you order, then every 30 days. Subject to approval by Klarna. Choose Klarna at checkout.
- Free delivery from £399
- 30-day returns
- Free technical support
Not sure about the size? Our guide shows you how to measure and choose the right size.
·
- Free delivery from £399
- 30-day returns
- Free technical advice
Contact us
Our technical team answers your questions and prepares quotes on every product we sell.
Monday to Friday, 10:00–17:00
Pack discounts
Applied to the whole order total. Enter the code at checkout.
Full description
Full description
The VanCurve is the push window made for converted vans. Its curved double acrylic glazing (5000 mm radius) follows the natural rounding of the side wall, where a flat window sits proud and leaves gaps. Dark tint, black aluminium frame, and a blackout blind for full darkness at night. ECE R43 approved, delivered complete with blind, mosquito net and fitting instructions.
Vehicle compatibility and dimensions
Compatible with:
- Campervans (L1H1 → L4H3)
Choosing the right size
- The size shown is the cut-out size, written width × height. A 700 × 400 window needs an opening 700 mm wide and 400 mm high.
- The overall exterior size is 3 cm larger on each axis. The interior finishing frame sits proud of the wall and needs no extra room.
Available cut-out sizes (mm)
| Position | Cut-out sizes |
|---|---|
| Side panels | 700 × 400 · 700 × 510 · 750 × 465 · 818 × 315 · 960 × 450* |
| Rear doors | 280 × 380 · 490 × 500* |
* L2H2 to L4H3 only.
Another model?
- A flat wall, or a size not listed here: the VanShade, same dark tint and rounded corners, in 28 sizes.
Advantages of the VanCurve
- A window that looks factory-fitted: it hugs the body line instead of sitting proud of it
- Privacy without living in the dark: daylight gets in, the inside stays discreet
- Total darkness at night: the blackout blind closes the window off completely
- Fresh air without insects: open the window, the mosquito net stays in place
- Fitted in about an hour: step-by-step guide included, and our team answers during the installation
Package content
- 1 × VanCurve curved push window
- 1 × Reinforced aluminium mounting counter-frame
- 1 × Interior finishing frame with blackout blind and mosquito net
- 1 × Full set of screws
- 1 × Step-by-step installation guide and ECE R43 approval certificate
What you will need
- One tube of Sikaflex 265 per window
- Wooden battens or a wooden frame, 25 mm thick minimum (recommended on a panel van)
- A jigsaw and a cordless drill/driver
Average installation time: about 1 hour. Plan for two people to hold the window in the cut-out while screwing.
Downloads
- Fitting instructions (PDF English)
- Approval certificate (CE / ECE R43)
- Window buying guide (PDF, available in 6 languages)
Frequently asked questions
Will it follow the curve of my side wall?
That is exactly what it is made for. The 5000 mm radius follows the natural rounding of a van's side wall, where a flat window sits proud and leaves gaps.
Is it road legal?
Yes — ECE R43. It can be fitted without manufacturer approval and is accepted for conversion approval across Europe (e.g. VASP in France, TÜV in Germany, ITV in Spain), in the UK (DVLA, MOT) and in Switzerland (MFK).
How do I pick the right size?
Mark the cut-out dimensions on the panel where you want the window. If nothing obstructs that area — ribs, cables, conduit — you can fit it.
A question or a doubt?
Our technical team answers within 24 hours, before you buy and while you fit it. Contact us →
VanCurve 818 x 315 - Window for campervans - With blind and mosquit...
Will it fit your van?
Maximum cut-out by vehicle, width × height in mm.
| Vehicle | Side panel | Rear doors |
|---|---|---|
| L1H1 | 700 × 400 | 500 × 350 |
| L2H2 | 970 × 520 | 500 × 450 ¹ 500 × 520 ² |
| L3H3 · L4H3 | 1100 × 550 | 500 × 450 ¹ 500 × 520 ² |
¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter
Maximums are indicative: ribs and reinforcements vary between model years. Measure your own panel, or send us a photo and we confirm for free.
How to read the size
- The size is the cut-out: width × height in mm.
- The exterior frame is 3 cm larger on each axis.
- The interior frame sits on the wall and needs no extra room.
Compare our windows
-
VanLight
- Opening
- Push-out
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Not included
- Sizes
- 7
-
VanSlide Square
- Opening
- Sliding
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Square corners
- Inner frame (blind + net)
- Included
- Sizes
- 7
-
VanSlide+ sliding window
- Opening
- Sliding
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 12
-
VanSlide sliding window
- Opening
- Sliding
- Tint
- Dark tint (30% light transmission)
- Glazing
- Single-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 14
-
VanSquare push window
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Square corners
- Inner frame (blind + net)
- Included
- Sizes
- 31
-
VanShade push window
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 28
-
This modelVanCurve
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Inner frame (blind + net)
- Included
- Sizes
- 7
-
VanLight push window – with blind and mosquito net
- Opening
- Push-out
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 22
Fitted in about an hour
- CutMark the cut-out on the panel and cut it with a jigsaw.
- BondClean, apply Aktivator-205, then a bead of Sikaflex 265 around the frame.
- ClampScrew the counter-frame from inside, then fit the interior frame. Plan for two people.
What you will need
- One tube of Sikaflex 265 per window
- Wooden battens, 25 mm thick minimum (recommended on a panel van)
- A jigsaw and a cordless drill
Customer reviews
No reviews on this version yet. The VanCurve, same model, is rated 5.0/5 by 3 customers.
Read the reviews →A question about your project?
Our technicians answer before and after your order, Monday to Friday, 10:00 to 17:00.
