VanSlide 550 x 320 - Window for motorhomes and campervans - With blind and mosquito net
- Acrylic glazing 43R
- Aluminium frame
- Universal fit
- Installation guide supplied
Single-pane acrylic glazing in an aluminium frame, sliding, with an inside lock. Supplied complete with blackout blind, mosquito net and fitting tutorial. The size shown is the cut-out. See all sizes See more
or 3 × £75.00 interest-free with Klarna
Pay in 3 interest-free instalments: the first when you order, then every 30 days. Subject to approval by Klarna. Choose Klarna at checkout.
- Free delivery from £399
- 30-day returns
- Free technical support
Not sure about the size? Our guide shows you how to measure and choose the right size.
In stock
Order within – for delivery on – Order today for delivery on –
- 30-day returns: return shipping is at your cost, unless the item is faulty or incorrect.
- Free delivery from £399
- 30-day returns
- Free technical advice
Contact us
Our technical team answers your questions and prepares quotes on every product we sell.
Monday to Friday, 10:00–17:00
Pack discounts
Applied to the whole order total. Enter the code at checkout.
Full description
Full description
The VanSlide is the sliding window for tight spots: behind a sliding door, under a roof ladder, or anywhere the window must stay flush with the bodywork. Dark-tinted acrylic glazing, black aluminium frame, a lock on the inside and a blackout blind for full darkness at night. ECE R43 approved, delivered complete with blind, mosquito net and fitting instructions.
Vehicle compatibility and dimensions
Compatible with:
- Campervans (L1H1 → L4H3)
- Motorhomes
- Caravans
Choosing the right size
- The size shown is the cut-out size, written width × height. A 700 × 400 window needs an opening 700 mm wide and 400 mm high.
- The overall exterior size is 3 cm larger on each axis. The interior finishing frame sits proud of the wall and needs no extra room.
Maximum cut-out by vehicle (mm)
| Van | Side panel | Rear doors |
|---|---|---|
| L1H1 | 700 × 400 | 500 × 350 |
| L2H2 | 970 × 520 | 500 × 450 ¹ 500 × 520 ² |
| L3H3 L4H3 |
1100 × 550 | 500 × 450 ¹ 500 × 520 ² |
¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter
Maximums are indicative — ribs and reinforcements vary between model years and conversions. Measure your own panel, or send us a photo and we will confirm for free.
Another model?
- Double glazing and more light: the VanSlide+ (light tint, 70% light transmission).
- Square corners: the VanSlide Square.
- A window that opens outwards: the VanShade push window.
Advantages of the VanSlide
- Opens flush with the bodywork: clear of a sliding door, a ladder or a passer-by
- Secure when parked: lock it from the inside, even half-open
- Privacy without living in the dark: daylight gets in, the inside stays discreet
- Total darkness at night: the blackout blind closes the window off completely
- Fitted in about an hour: step-by-step guide included, and our team answers during the installation
Package content
- 1 × VanSlide sliding window
- 1 × Reinforced aluminium mounting counter-frame
- 1 × Interior finishing frame with blackout blind and mosquito net
- 1 × Full set of screws
- 1 × Step-by-step installation guide
What you will need
- One tube of Sikaflex 265 per window
- Wooden battens or a wooden frame, 25 mm thick minimum (recommended on a panel van)
- A jigsaw and a cordless drill/driver
Average installation time: about 1 hour. Plan for two people to hold the window in the cut-out while screwing.
Downloads
- Fitting instructions (PDF English)
- Approval certificate (CE / ECE R43)
- Window buying guide (PDF, available in 6 languages)
Frequently asked questions
Sliding or push window: which one should I choose?
A sliding window opens flush with the bodywork, so it is the safe choice behind a sliding door, under a ladder or along a walkway. A push window opens wider and lets in more air when it rains.
Will it fit the curved wall of a panel van?
Yes. The reinforced aluminium counter-frame works on curved walls (panel vans) as well as flat ones (motorhomes, caravans). The small gap left on a curved wall is taken up by the Sikaflex.
Is it road legal?
Yes — ECE R43. It can be fitted without manufacturer approval and is accepted for conversion approval across Europe (e.g. VASP in France, TÜV in Germany, ITV in Spain), in the UK (DVLA, MOT) and in Switzerland (MFK).
How do I pick the right size?
Mark the cut-out dimensions on the panel where you want the window. If nothing obstructs that area — ribs, cables, conduit — you can fit it.
A question or a doubt?
Our technical team answers within 24 hours, before you buy and while you fit it. Contact us →
VanSlide 550 x 320 - Window for motorhomes and campervans - With bl...
Will it fit your van?
Maximum cut-out by vehicle, width × height in mm.
| Vehicle | Side panel | Rear doors |
|---|---|---|
| L1H1 | 700 × 400 | 500 × 350 |
| L2H2 | 970 × 520 | 500 × 450 ¹ 500 × 520 ² |
| L3H3 · L4H3 | 1100 × 550 | 500 × 450 ¹ 500 × 520 ² |
¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter
Maximums are indicative: ribs and reinforcements vary between model years. Measure your own panel, or send us a photo and we confirm for free.
How to read the size
- The size is the cut-out: width × height in mm.
- The exterior frame is 3 cm larger on each axis.
- The interior frame sits on the wall and needs no extra room.
Compare our windows
-
VanLight
- Opening
- Push-out
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Not included
- Sizes
- 7
-
VanSlide Square
- Opening
- Sliding
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Square corners
- Inner frame (blind + net)
- Included
- Sizes
- 7
-
VanSlide+ sliding window
- Opening
- Sliding
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 12
-
This modelVanSlide sliding window
- Opening
- Sliding
- Tint
- Dark tint (30% light transmission)
- Glazing
- Single-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 14
-
VanSquare push window
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Square corners
- Inner frame (blind + net)
- Included
- Sizes
- 31
-
VanShade push window
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 28
-
VanCurve
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Inner frame (blind + net)
- Included
- Sizes
- 7
-
VanLight push window – with blind and mosquito net
- Opening
- Push-out
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 22
Fitted in about an hour
- CutMark the cut-out on the panel and cut it with a jigsaw.
- BondClean, apply Aktivator-205, then a bead of Sikaflex 265 around the frame.
- ClampScrew the counter-frame from inside, then fit the interior frame. Plan for two people.
What you will need
- One tube of Sikaflex 265 per window
- Wooden battens, 25 mm thick minimum (recommended on a panel van)
- A jigsaw and a cordless drill
Customer reviews
No reviews on this version yet. The VanSlide sliding window, same model, is rated 5.0/5 by 4 customers.
Read the reviews →A question about your project?
Our technicians answer before and after your order, Monday to Friday, 10:00 to 17:00.
