VanLight - Push window for motorhomes and campervans
- Double acrylic glazing 43R
- Aluminium frame
- Universal fit
- Installation guide supplied
Double acrylic glazing in an aluminium frame, supplied with the fitting tutorial. Inner frame with blackout blind and mosquito net available separately, in white or black. See more
or 3 × £46.67 interest-free with Klarna
Pay in 3 interest-free instalments: the first when you order, then every 30 days. Subject to approval by Klarna. Choose Klarna at checkout.
- Free delivery from £399
- 30-day returns
- Free technical support
Not sure about the size? Our guide shows you how to measure and choose the right size.
·
- Free delivery from £399
- 30-day returns
- Free technical advice
Contact us
Our technical team answers your questions and prepares quotes on every product we sell.
Monday to Friday, 10:00–17:00
Pack discounts
Applied to the whole order total. Enter the code at checkout.
Full description
Full description
The VanLight window only is the same bright push window, supplied with its counter-frame only. Its light-grey double acrylic glazing lets in 70% of daylight. It is made for conversions that trim the opening themselves: your panels, your finish. ECE R43 approved.
Vehicle compatibility and dimensions
Compatible with:
- Campervans (L1H1 → L4H3)
- Motorhomes
- Caravans
Choosing the right size
- The size shown is the cut-out size, written width × height. A 700 × 300 window needs an opening 700 mm wide and 300 mm high.
- The overall exterior size is 3 cm larger on each axis. Your own interior trim dresses the edges of the opening and needs no extra room.
Maximum cut-out by vehicle (mm)
| Van | Side panel | Rear doors |
|---|---|---|
| L1H1 | 700 × 400 | 500 × 350 |
| L2H2 | 970 × 520 | 500 × 450 ¹ 500 × 520 ² |
| L3H3 L4H3 |
1100 × 550 | 500 × 450 ¹ 500 × 520 ² |
¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter
Maximums are indicative — ribs and reinforcements vary between model years and conversions. Measure your own panel, or send us a photo and we will confirm for free.
Another model?
- Delivered complete: the VanLight with blind and mosquito net.
- Add a blind and mosquito net later: inner frame with blind and mosquito net, in white or black.
- More privacy: the VanShade (dark tint, 30% light transmission).
Advantages of the VanLight
- A bright interior: more than twice the daylight of a dark tint, which changes how a small van feels on a grey day
- Your own finish: panel and trim the opening exactly as you want
- Air it out, safely: ventilate on the latch while the van stays secure
- A tight fit on any wall: the reinforced counter-frame pulls tight against curved and flat panels
- Fitted in about an hour: step-by-step guide included, and our team answers during the installation
Package content
- 1 × VanLight push window
- 1 × Reinforced aluminium mounting counter-frame
- 1 × Full set of screws
- 1 × Step-by-step installation guide
- 1 × ECE R43 approval certificate
To add a blind and mosquito net later: inner frame with blind and mosquito net, in white or black.
What you will need
- One tube of Sikaflex 265 per window
- Wooden battens or a wooden frame, 25 mm thick minimum (recommended on a panel van)
- A jigsaw and a cordless drill/driver
- Your own interior trim for the edges of the opening
Average installation time: about 1 hour. Plan for two people to hold the window in the cut-out while screwing.
Downloads
- Fitting instructions (PDF English)
- Approval certificate (CE / ECE R43)
- Window buying guide (PDF, available in 6 languages)
Frequently asked questions
Will it fit the curved wall of a panel van?
Yes. The reinforced aluminium counter-frame works on curved walls (panel vans) as well as flat ones (motorhomes, caravans). The small gap left on a curved wall is taken up by the Sikaflex.
Is it road legal?
Yes — ECE R43. It can be fitted without manufacturer approval and is accepted for conversion approval across Europe (e.g. VASP in France, TÜV in Germany, ITV in Spain), in the UK (DVLA, MOT) and in Switzerland (MFK).
How do I pick the right size?
Mark the cut-out dimensions on the panel where you want the window. If nothing obstructs that area — ribs, cables, conduit — you can fit it.
A question or a doubt?
Our technical team answers within 24 hours, before you buy and while you fit it. Contact us →
VanLight - Push window for motorhomes and campervans
Will it fit your van?
Maximum cut-out by vehicle, width × height in mm.
| Vehicle | Side panel | Rear doors |
|---|---|---|
| L1H1 | 700 × 400 | 500 × 350 |
| L2H2 | 970 × 520 | 500 × 450 ¹ 500 × 520 ² |
| L3H3 · L4H3 | 1100 × 550 | 500 × 450 ¹ 500 × 520 ² |
¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter
Maximums are indicative: ribs and reinforcements vary between model years. Measure your own panel, or send us a photo and we confirm for free.
How to read the size
- The size is the cut-out: width × height in mm.
- The exterior frame is 3 cm larger on each axis.
Compare our windows
-
This modelVanLight
- Opening
- Push-out
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Not included
- Sizes
- 7
-
VanSlide Square
- Opening
- Sliding
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Square corners
- Inner frame (blind + net)
- Included
- Sizes
- 7
-
VanSlide+ sliding window
- Opening
- Sliding
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 12
-
VanSlide sliding window
- Opening
- Sliding
- Tint
- Dark tint (30% light transmission)
- Glazing
- Single-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 14
-
VanSquare push window
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Square corners
- Inner frame (blind + net)
- Included
- Sizes
- 31
-
VanShade push window
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 28
-
VanCurve
- Opening
- Push-out
- Tint
- Dark tint (30% light transmission)
- Glazing
- Double-glazed acrylic
- Inner frame (blind + net)
- Included
- Sizes
- 7
-
VanLight push window – with blind and mosquito net
- Opening
- Push-out
- Tint
- Light grey tint (70% light transmission)
- Glazing
- Double-glazed acrylic
- Corners
- Round corners
- Inner frame (blind + net)
- Included
- Sizes
- 22
Fitted in about an hour
- CutMark the cut-out on the panel and cut it with a jigsaw.
- BondClean, apply Aktivator-205, then a bead of Sikaflex 265 around the frame.
- ClampScrew the counter-frame from inside, then fit the interior frame. Plan for two people.
What you will need
- One tube of Sikaflex 265 per window
- Wooden battens, 25 mm thick minimum (recommended on a panel van)
- A jigsaw and a cordless drill
A question about your project?
Our technicians answer before and after your order, Monday to Friday, 10:00 to 17:00.
