{"title":"Campervan Insulation — Armaflex","description":"\u003cp\u003eArmaflex AF is the closed-cell elastomeric insulation that professional converters use on vans. It works against cold, heat, noise and condensation at once, and its self-adhesive face goes straight onto clean bodywork — no frame, no staples, no separate vapour barrier.\u003c\/p\u003e\u003cp\u003ePick the thickness by where it goes: 6 mm under a floor, 10 mm on walls and ribs, 19 mm for a van used in winter, 25 mm where you can afford the centimetres. Then seal every joint with AF tape and degrease the panels with Armaflex Cleaner before you start — that is what makes an insulation job last.\u003c\/p\u003e","products":[{"product_id":"armaflex-af-6-mm-self-adhesive-insulation-roll-15m2","title":"Insulation Armaflex AF 6 mm – self-adhesive roll 15 m², for campervans and motorhomes","description":"\u003cp\u003eArmaflex AF is the closed-cell elastomeric foam that professional converters use to insulate a van. It works against cold, heat, noise and condensation at the same time, and its self-adhesive face lets you lay it straight onto clean bodywork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right thickness\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm\u003c\/strong\u003e — floors under a subfloor, wheel arches, and any panel where height matters more than performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm\u003c\/strong\u003e — the usual compromise for walls and the inside of ribs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 mm\u003c\/strong\u003e — walls and ceiling on a van used in winter; the thickness most full conversions settle on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm\u003c\/strong\u003e — maximum insulation, where you can afford the lost centimetres: ceiling, cab bulkhead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCount the surface to cover, then add about 10 % for cuts. A full L2H2 van takes roughly 30 m² of foam, plus one roll of AF tape per 5 m² to seal the joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy converters use Armaflex\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stops condensation at the source.\u003c\/strong\u003e The closed cells and the built-in vapour barrier keep humid air out of the foam, so moisture never reaches the cold metal behind it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt insulates more per millimetre.\u003c\/strong\u003e With a thermal conductivity of 0.033 W\/(m·K), a thin layer does the work of a much thicker mineral or synthetic wool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is quiet.\u003c\/strong\u003e The foam damps the drumming of large flat panels, which you hear immediately on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt survives a vehicle.\u003c\/strong\u003e Microban® treatment against mould, adhesive rated to 85 °C, and fire behaviour conforming to EN 14304.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 self-adhesive Armaflex AF roll, 15 m × 1 m, 6 mm thick (15 m²)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat you will need:\u003c\/strong\u003e Armaflex AF tape to seal the joints, Armaflex Cleaner to degrease the panels before laying, a cutter and a roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with AF tape and the foam is laid directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I lay it over an existing insulation?\u003c\/strong\u003e It is made to go on bare, clean, dry metal. Any air trapped between two layers is where condensation will form.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I need for my van?\u003c\/strong\u003e About 20 m² for an L1H1, 30 m² for an L2H2 and 40 m² for an L3H3, cuts included. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"Default Title","offer_id":66127660319069,"sku":"AF6","price":229.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/armacell-armaflex-af-25-mm-auto-adhesif-5250177.webp?v=1791228427"},{"product_id":"armaflex-af-10-mm-self-adhesive-insulation-roll-10m2","title":"Insulation Armaflex AF 10 mm – self-adhesive roll 10 m², for campervans and motorhomes","description":"\u003cp\u003eArmaflex AF is the closed-cell elastomeric foam that professional converters use to insulate a van. It works against cold, heat, noise and condensation at the same time, and its self-adhesive face lets you lay it straight onto clean bodywork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right thickness\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm\u003c\/strong\u003e — floors under a subfloor, wheel arches, and any panel where height matters more than performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm\u003c\/strong\u003e — the usual compromise for walls and the inside of ribs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 mm\u003c\/strong\u003e — walls and ceiling on a van used in winter; the thickness most full conversions settle on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm\u003c\/strong\u003e — maximum insulation, where you can afford the lost centimetres: ceiling, cab bulkhead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCount the surface to cover, then add about 10 % for cuts. A full L2H2 van takes roughly 30 m² of foam, plus one roll of AF tape per 5 m² to seal the joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy converters use Armaflex\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stops condensation at the source.\u003c\/strong\u003e The closed cells and the built-in vapour barrier keep humid air out of the foam, so moisture never reaches the cold metal behind it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt insulates more per millimetre.\u003c\/strong\u003e With a thermal conductivity of 0.033 W\/(m·K), a thin layer does the work of a much thicker mineral or synthetic wool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is quiet.\u003c\/strong\u003e The foam damps the drumming of large flat panels, which you hear immediately on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt survives a vehicle.\u003c\/strong\u003e Microban® treatment against mould, adhesive rated to 85 °C, and fire behaviour conforming to EN 14304.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 self-adhesive Armaflex AF roll, 10 m × 1 m, 10 mm thick (10 m²)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat you will need:\u003c\/strong\u003e Armaflex AF tape to seal the joints, Armaflex Cleaner to degrease the panels before laying, a cutter and a roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with AF tape and the foam is laid directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I lay it over an existing insulation?\u003c\/strong\u003e It is made to go on bare, clean, dry metal. Any air trapped between two layers is where condensation will form.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I need for my van?\u003c\/strong\u003e About 20 m² for an L1H1, 30 m² for an L2H2 and 40 m² for an L3H3, cuts included. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"Default Title","offer_id":66127660384605,"sku":"AF10","price":165.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/armacell-armaflex-af-10-mm-auto-adhesif-6654918.webp?v=1791228429"},{"product_id":"armaflex-af-19-mm-self-adhesive-insulation-roll-6m2","title":"Insulation Armaflex AF 19 mm – self-adhesive roll 6 m², for campervans and motorhomes","description":"\u003cp\u003eArmaflex AF is the closed-cell elastomeric foam that professional converters use to insulate a van. It works against cold, heat, noise and condensation at the same time, and its self-adhesive face lets you lay it straight onto clean bodywork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right thickness\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm\u003c\/strong\u003e — floors under a subfloor, wheel arches, and any panel where height matters more than performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm\u003c\/strong\u003e — the usual compromise for walls and the inside of ribs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 mm\u003c\/strong\u003e — walls and ceiling on a van used in winter; the thickness most full conversions settle on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm\u003c\/strong\u003e — maximum insulation, where you can afford the lost centimetres: ceiling, cab bulkhead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCount the surface to cover, then add about 10 % for cuts. A full L2H2 van takes roughly 30 m² of foam, plus one roll of AF tape per 5 m² to seal the joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy converters use Armaflex\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stops condensation at the source.\u003c\/strong\u003e The closed cells and the built-in vapour barrier keep humid air out of the foam, so moisture never reaches the cold metal behind it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt insulates more per millimetre.\u003c\/strong\u003e With a thermal conductivity of 0.033 W\/(m·K), a thin layer does the work of a much thicker mineral or synthetic wool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is quiet.\u003c\/strong\u003e The foam damps the drumming of large flat panels, which you hear immediately on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt survives a vehicle.\u003c\/strong\u003e Microban® treatment against mould, adhesive rated to 85 °C, and fire behaviour conforming to EN 14304.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 self-adhesive Armaflex AF roll, 6 m × 1 m, 19 mm thick (6 m²)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat you will need:\u003c\/strong\u003e Armaflex AF tape to seal the joints, Armaflex Cleaner to degrease the panels before laying, a cutter and a roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with AF tape and the foam is laid directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I lay it over an existing insulation?\u003c\/strong\u003e It is made to go on bare, clean, dry metal. Any air trapped between two layers is where condensation will form.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I need for my van?\u003c\/strong\u003e About 20 m² for an L1H1, 30 m² for an L2H2 and 40 m² for an L3H3, cuts included. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"Default Title","offer_id":66127660450141,"sku":"AF19","price":140.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/armacell-armaflex-af-25-mm-auto-adhesif-5250177_1d2be0fa-f4d1-492d-9cb0-1591044f1430.webp?v=1791228430"},{"product_id":"armaflex-af-25-mm-self-adhesive-insulation-roll-4m2","title":"Insulation Armaflex AF 25 mm – self-adhesive roll 4 m², for campervans and motorhomes","description":"\u003cp\u003eArmaflex AF is the closed-cell elastomeric foam that professional converters use to insulate a van. It works against cold, heat, noise and condensation at the same time, and its self-adhesive face lets you lay it straight onto clean bodywork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right thickness\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm\u003c\/strong\u003e — floors under a subfloor, wheel arches, and any panel where height matters more than performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mm\u003c\/strong\u003e — the usual compromise for walls and the inside of ribs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 mm\u003c\/strong\u003e — walls and ceiling on a van used in winter; the thickness most full conversions settle on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm\u003c\/strong\u003e — maximum insulation, where you can afford the lost centimetres: ceiling, cab bulkhead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCount the surface to cover, then add about 10 % for cuts. A full L2H2 van takes roughly 30 m² of foam, plus one roll of AF tape per 5 m² to seal the joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy converters use Armaflex\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt stops condensation at the source.\u003c\/strong\u003e The closed cells and the built-in vapour barrier keep humid air out of the foam, so moisture never reaches the cold metal behind it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt insulates more per millimetre.\u003c\/strong\u003e With a thermal conductivity of 0.033 W\/(m·K), a thin layer does the work of a much thicker mineral or synthetic wool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is quiet.\u003c\/strong\u003e The foam damps the drumming of large flat panels, which you hear immediately on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt survives a vehicle.\u003c\/strong\u003e Microban® treatment against mould, adhesive rated to 85 °C, and fire behaviour conforming to EN 14304.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 self-adhesive Armaflex AF roll, 4 m × 1 m, 25 mm thick (4 m²)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat you will need:\u003c\/strong\u003e Armaflex AF tape to seal the joints, Armaflex Cleaner to degrease the panels before laying, a cutter and a roller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with AF tape and the foam is laid directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I lay it over an existing insulation?\u003c\/strong\u003e It is made to go on bare, clean, dry metal. Any air trapped between two layers is where condensation will form.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I need for my van?\u003c\/strong\u003e About 20 m² for an L1H1, 30 m² for an L2H2 and 40 m² for an L3H3, cuts included. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"Default Title","offer_id":66127660679517,"sku":"AF25","price":123.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/armacell-armaflex-af-25-mm-auto-adhesif-5250177_8a858185-2ec7-4783-ba62-aab94bff4506.webp?v=1791228431"},{"product_id":"armaflex-af-insulation-tape-15m","title":"Insulation Armaflex AF tape – self-adhesive roll 15 m, for campervans and motorhomes","description":"\u003cp\u003eAF\/Armaflex tape is what turns a set of insulation panels into a continuous vapour barrier. It is made of the same closed-cell foam as the rolls, so the joint insulates like the rest of the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much tape do I need?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAbout \u003cstrong\u003eone roll per 5 m²\u003c\/strong\u003e of Armaflex laid.\u003c\/li\u003e\n\u003cli\u003e30 m² of foam — 6 rolls. 36 m² — 7 rolls. 42 m² — 8 rolls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt closes the cold bridges.\u003c\/strong\u003e Every uncovered joint between two panels is a path for humid air to reach the cold metal behind the insulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt prevents the rust you would not see.\u003c\/strong\u003e Condensation forming behind the foam attacks the bodywork from the inside, years before anything shows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is the same material.\u003c\/strong\u003e Closed-cell AF foam, 3 mm thick, not an aluminium or fabric tape.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 self-adhesive Armaflex AF tape roll, 15 m × 50 mm, 3 mm thick\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat you will need:\u003c\/strong\u003e Armaflex Cleaner to degrease the surface first, and a roller to press the tape down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I lay it?\u003c\/strong\u003e On a clean, dry surface, without pulling on the roll — stretched tape loses both its grip and its insulating value. Press it down along the whole length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use ordinary aluminium tape instead?\u003c\/strong\u003e It will close the joint but it will not insulate it, so the joint stays a cold line across the panel. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"Default Title","offer_id":66127660712285,"sku":"AF-TAPE-MC","price":16.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/armaflex-af-bande-isolante-adhesive-en-rouleau-de-15m-armacell-7288001.jpg?v=1791228434"},{"product_id":"armaflex-cleaner-1l-armacell","title":"Armaflex Cleaner 1 L – surface cleaner before insulation, for campervans and motorhomes","description":"\u003cp\u003eSelf-adhesive insulation only holds on a clean surface. Armaflex Cleaner removes the oil, dust and release agents left on the bodywork at the factory, so the foam bonds to the metal and stays there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOn every panel, rib and door frame before laying Armaflex AF.\u003c\/li\u003e\n\u003cli\u003eOn the surfaces you are about to glue with Armaflex 520 contact adhesive.\u003c\/li\u003e\n\u003cli\u003eOn your brushes and rollers once the job is done.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is the step people skip.\u003c\/strong\u003e Insulation that peels off a wall after one summer was almost always laid on a panel that was never degreased.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt dries fast.\u003c\/strong\u003e Wipe, let it flash off, lay the foam — no waiting between the two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is made for this foam.\u003c\/strong\u003e ARMACELL formulated it for the AF range, so it will not attack the material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage content\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 × 1 L can of Armaflex Cleaner\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat you will need:\u003c\/strong\u003e lint-free cloths, and gloves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e One litre is enough to degrease a full L2H2 van before insulating it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use white spirit instead?\u003c\/strong\u003e It leaves a film that the adhesive will not grip, and it can attack the foam. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"Default Title","offer_id":66127660876125,"sku":"AF-CLEANER-1L","price":22.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/cleaner-1l-pour-armaflex-armacell-9146233.webp?v=1791228435"},{"product_id":"armaflex-af-insulation-pack-van-l1h1","title":"Insulation pack Armaflex AF – compact L1H1 van, 19 or 25 mm self-adhesive","description":"\u003cp\u003eBare bodywork is one long thermal bridge: it radiates cold in winter, stores heat in summer and collects condensation behind every panel. This kit gathers the quantities an \u003cstrong\u003eL1H1\u003c\/strong\u003e conversion actually uses (Renault Trafic, Volkswagen T4\/T5\/T6, Ford Transit Custom, Fiat Talento and equivalents), in the thickness each area calls for, so you order once and insulate the whole van in one go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls and ceiling\u003c\/strong\u003e — your choice of \u003cstrong\u003e2 rolls of Armaflex AF 19 mm (12 m²)\u003c\/strong\u003e for the standard version, or \u003cstrong\u003e3 rolls of Armaflex AF 25 mm (12 m²)\u003c\/strong\u003e for reinforced insulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor, ribs and wheel arches\u003c\/strong\u003e — \u003cstrong\u003e1 roll of Armaflex AF 10 mm (10 m²)\u003c\/strong\u003e, thinner and more flexible, to follow the shapes without losing height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoints and finishing\u003c\/strong\u003e — \u003cstrong\u003e2 rolls of Armaflex AF tape, 15 m each\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e — \u003cstrong\u003e1 Armaflex Cleaner, 1 L\u003c\/strong\u003e, to degrease the metal before laying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e19 mm or 25 mm: which version?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e19 mm\u003c\/strong\u003e version is what most conversions settle on: enough for winter use, and it keeps the interior width. The \u003cstrong\u003e25 mm\u003c\/strong\u003e version is for vans used out of season or exposed to wide temperature swings, where you can afford the extra centimetre on the walls and ceiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you start\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean and degrease the bodywork with the cleaner supplied. Lay the Armaflex on dry bare metal, with no air gap behind it, then seal every joint with the AF tape. Count about 10 % extra for cuts on complex panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a separate vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with the AF tape included and the foam sits directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this enough for my whole van?\u003c\/strong\u003e The kit covers 22 m² of foam: the walls, the ceiling, the floor, the ribs and the wheel arches of a standard L1H1. Measure your panels first if your van has a raised roof or a stretched rear overhang — you may need one extra roll. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"19 mm","offer_id":66140618129757,"sku":"PACK.ISO.L1H1.19","price":477.34,"currency_code":"EUR","in_stock":true},{"title":"25 mm","offer_id":66140626846045,"sku":"PACK.ISO.L1H1.25","price":560.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/Isolation_kit_armaflex_pour_fourgon_L1H1_Vanlife_store.png?v=1791382630"},{"product_id":"armaflex-af-insulation-pack-van-l2h2","title":"Insulation pack Armaflex AF – L2H2 van, 19 or 25 mm self-adhesive","description":"\u003cp\u003eBare bodywork is one long thermal bridge: it radiates cold in winter, stores heat in summer and collects condensation behind every panel. This kit gathers the quantities an \u003cstrong\u003eL2H2\u003c\/strong\u003e conversion actually uses (Fiat Ducato, Peugeot Boxer, Citroën Jumper, Renault Master, Mercedes Sprinter, Ford Transit and equivalents), in the thickness each area calls for, so you order once and insulate the whole van in one go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls and ceiling\u003c\/strong\u003e — your choice of \u003cstrong\u003e3 rolls of Armaflex AF 19 mm (18 m²)\u003c\/strong\u003e for the standard version, or \u003cstrong\u003e4 rolls of Armaflex AF 25 mm (16 m²)\u003c\/strong\u003e for reinforced insulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor, ribs and wheel arches\u003c\/strong\u003e — \u003cstrong\u003e1 roll of Armaflex AF 10 mm (10 m²)\u003c\/strong\u003e, thinner and more flexible, to follow the shapes without losing height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoints and finishing\u003c\/strong\u003e — \u003cstrong\u003e2 rolls of Armaflex AF tape, 15 m each\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e — \u003cstrong\u003e1 Armaflex Cleaner, 1 L\u003c\/strong\u003e, to degrease the metal before laying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e19 mm or 25 mm: which version?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e19 mm\u003c\/strong\u003e version is what most conversions settle on: enough for winter use, and it keeps the interior width. The \u003cstrong\u003e25 mm\u003c\/strong\u003e version is for vans used out of season or exposed to wide temperature swings, where you can afford the extra centimetre on the walls and ceiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you start\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean and degrease the bodywork with the cleaner supplied. Lay the Armaflex on dry bare metal, with no air gap behind it, then seal every joint with the AF tape. Count about 10 % extra for cuts on complex panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a separate vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with the AF tape included and the foam sits directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this enough for my whole van?\u003c\/strong\u003e The kit covers 26 to 28 m² of foam: the walls, the ceiling, the floor, the ribs and the wheel arches of a standard L2H2. Measure your panels first if your van has a raised roof or a stretched rear overhang — you may need one extra roll. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"19 mm","offer_id":66140619538781,"sku":"PACK.ISO.L2H2.19","price":611.1,"currency_code":"EUR","in_stock":true},{"title":"25 mm","offer_id":66140627435869,"sku":"PACK.ISO.L2H2.25","price":677.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/Isolation_kit_armaflex_pour_fourgon_L2H2_Vanlife_store.png?v=1791382639"},{"product_id":"armaflex-af-insulation-pack-van-l3h3","title":"Insulation pack Armaflex AF – large L3H3 van, 19 or 25 mm self-adhesive","description":"\u003cp\u003eBare bodywork is one long thermal bridge: it radiates cold in winter, stores heat in summer and collects condensation behind every panel. This kit gathers the quantities an \u003cstrong\u003eL3H3\u003c\/strong\u003e conversion actually uses (Fiat Ducato, Peugeot Boxer, Citroën Jumper, Renault Master, Mercedes Sprinter and Ford Transit in L3H3 and equivalents), in the thickness each area calls for, so you order once and insulate the whole van in one go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalls and ceiling\u003c\/strong\u003e — your choice of \u003cstrong\u003e4 rolls of Armaflex AF 19 mm (24 m²)\u003c\/strong\u003e for the standard version, or \u003cstrong\u003e6 rolls of Armaflex AF 25 mm (24 m²)\u003c\/strong\u003e for reinforced insulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor, ribs and wheel arches\u003c\/strong\u003e — \u003cstrong\u003e1 roll of Armaflex AF 10 mm (10 m²)\u003c\/strong\u003e, thinner and more flexible, to follow the shapes without losing height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoints and finishing\u003c\/strong\u003e — \u003cstrong\u003e2 rolls of Armaflex AF tape, 15 m each\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e — \u003cstrong\u003e1 Armaflex Cleaner, 1 L\u003c\/strong\u003e, to degrease the metal before laying.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e19 mm or 25 mm: which version?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e19 mm\u003c\/strong\u003e version is what most conversions settle on: enough for winter use, and it keeps the interior width. The \u003cstrong\u003e25 mm\u003c\/strong\u003e version is for vans used out of season or exposed to wide temperature swings, where you can afford the extra centimetre on the walls and ceiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you start\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean and degrease the bodywork with the cleaner supplied. Lay the Armaflex on dry bare metal, with no air gap behind it, then seal every joint with the AF tape. Count about 10 % extra for cuts on complex panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I still need a separate vapour barrier?\u003c\/strong\u003e No. Armaflex AF is its own vapour barrier, provided every joint is sealed with the AF tape included and the foam sits directly on the metal, with no air gap behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this enough for my whole van?\u003c\/strong\u003e The kit covers 34 m² of foam: the walls, the ceiling, the floor, the ribs and the wheel arches of a standard L3H3. Measure your panels first if your van has a raised roof or a stretched rear overhang — you may need one extra roll. A question or a doubt? \u003ca href=\"\/pages\/contact\"\u003eOur technical team will answer you\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARMACELL","offers":[{"title":"19 mm","offer_id":66140619833693,"sku":"PACK.ISO.L3H3.19","price":744.86,"currency_code":"EUR","in_stock":true},{"title":"25 mm","offer_id":66140627894621,"sku":"PACK.ISO.L3H3.25","price":912.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/6042\/9661\/files\/Isolation_kit_armaflex_pour_fourgon_L3H3_Vanlife_store.png?v=1791382639"}],"url":"https:\/\/www.eurovan-shop.co.uk\/collections\/campervan-insulation.oembed","provider":"EuroVan-shop","version":"1.0","type":"link"}